References
Cheng, P. & Yang, Y. Narrowing the band gap: the key to high-performance organic photovoltaics. Acc. Chem. Res. 53, 1218–1228 (2020).
Zhao, Y. et al. Achieving sustainability of greenhouses by integrating stable semi-transparent organic photovoltaics. Nat. Sustain. 6, 539–548 (2023).
Meng, D. et al. Near-infrared materials: the turning point of organic photovoltaics. Adv. Mater. 34, 2107330 (2022).
Shen, W., Zhao, Y. & Liu, F. Highlights of mainstream solar cell efficiencies in 2022. Front. Energy 17, 9–15 (2023).
Cheng, H. W., Zhao, Y. & Yang, Y. Toward high-performance semitransparent organic photovoltaics with narrow-bandgap donors and non-fullerene acceptors. Adv. Energy Mater. 12, 2102908 (2022).
Cheng, P., Li, G., Zhan, X. & Yang, Y. Next-generation organic photovoltaics based on non-fullerene acceptors. Nat. Photon. 12, 131–142 (2018).
Huang, C. et al. Highly efficient organic solar cells based on S,N-heteroacene non-fullerene acceptors. Chem. Mater. 30, 5429–5434 (2018).
Shi, X. et al. Design of a highly crystalline low-band gap fused-ring electron acceptor for high-efficiency solar cells with low energy loss. Chem. Mater. 29, 8369–8376 (2017).
Zhang, M. et al. High‐efficiency organic photovoltaics using eutectic acceptor fibrils to achieve current amplification. Adv. Mater. 33, 2007177 (2021).
Fu, J. et al. 19.31% binary organic solar cell and low non-radiative recombination enabled by non-monotonic intermediate state transition. Nat. Commun. 14, 1760 (2023).
Zhu, L. et al. Single-junction organic solar cells with over 19% efficiency enabled by a refined double-fibril network morphology. Nat. Mater. 21, 656–663 (2022).
Zhang, M. et al. Single-layered organic photovoltaics with double cascading charge transport pathways: 18% efficiencies. Nat. Commun. 12, 309 (2021).
Zeng, R. et al. All-polymer organic solar cells with nano-to-micron hierarchical morphology and large light receiving angle. Nat. Commun. 14, 4148 (2023).
Wang, X. et al. A simple nonfused ring electron acceptor with a power conversion efficiency over 16%. Chin. J. Chem. 41, 665–671 (2023).
Zheng, X. et al. Simple non-fused ring electron acceptors with well-controlled terminal group stacking. Cell Rep. Phys. Sci. 3, 101169 (2022).
Li, X. et al. Synthesis and photovoltaic properties of a simple non-fused small molecule acceptor. Org. Electron. 58, 133–138 (2018).
Bai, Q. et al. Recent progress in low-cost noncovalently fused-ring electron acceptors for organic solar cells. Aggregate 3, e281 (2022).
Meng, D. et al. Noncovalent π-stacked robust topological organic framework. Proc. Natl Acad. Sci. USA 117, 20397–20403 (2020).
Wang, X. et al. Simple nonfused ring electron acceptors with 3D network packing structure boosting the efficiency of organic solar cells to 15.44%. Adv. Energy Mater. 11, 2102591 (2021).
Fan, B. et al. Understanding the role of removable solid additives: selective interaction contributes to vertical component distributions. Adv. Mater. 35, 2302861 (2023).
van Krevelen, D. W. & te Nijenhuis, K. Properties of Polymers (Elsevier, 2009).
Bagley, E. B., Nelson, T. P. & Scigliano, J. M. Three-dimensional solubility parameters and their relationship to internal pressure measurements in polar and hydrogen bonding solvents. J. Paint Technol. 43, 35–42 (1971).
Hansen, C. M. Polymer additives and solubility parameters. Prog. Org. Coat. 51, 109–112 (2004).
Liron, Z., Srebrenik, S., Martin, A. & Cohen, S. Theoretical derivation of solute-solvent interaction parameter in binary solution: case of the deviation from Raoult’s Law. J. Pharm. Sci. 75, 463–468 (1986).
Fu, J. et al. Eutectic phase behavior induced by a simple additive contributes to efficient organic solar cells. Nano Energy 84, 105862 (2021).
Xie, Y. et al. High-efficiency organic solar cells enabled by an alcohol-washable solid additive. Sci. China Chem. 64, 2161–2168 (2021).
Li, F. et al. Hydrogen-bond-bridged intermediate for perovskite solar cells with enhanced efficiency and stability. Nat. Photon. 17, 478–484 (2023).
Liu, M. et al. Compact hole-selective self-assembled monolayers enabled by disassembling micelles in solution for efficient perovskite solar cells. Adv. Mater. 35, 2304415 (2023).
Bi, L. et al. Deciphering the roles of MA-based volatile additives for α-FAPbI3 to enable efficient inverted perovskite solar cells. J. Am. Chem. Soc. 145, 5920–5929 (2023).
Zhou, Y. et al. High-efficiency organic solar cells based on a low-cost fully non-fused electron acceptor. Adv. Funct. Mater. 31, 2101742 (2021).
Guo, J. et al. 15.71% efficiency all-small-molecule organic solar cells based on low-cost synthesized donor molecules. Adv. Funct. Mater. 32, 2110159 (2022).
Zhou, G. et al. Marcus hole transfer governs charge generation and device operation in nonfullerene organic solar cells. ACS Energy Lett. 6, 2971–2981 (2021).
Zhou, G. et al. Spontaneous carrier generation and low recombination in high-efficiency non-fullerene solar cells. Energy Environ. Sci. 15, 3483–3493 (2022).
Jiang, K. et al. Suppressed recombination loss in organic photovoltaics adopting a planar–mixed heterojunction architecture. Nat. Energy 7, 1076–1086 (2022).
Xue, J. et al. A small-molecule “charge driver” enables perovskite quantum dot solar cells with efficiency approaching 13%. Adv. Mater. 31, 1900111 (2019).
Wang, M. et al. Rational selection of the polymeric structure for interface engineering of perovskite solar cells. Joule 6, 1032–1048 (2022).
Hamilton, R. et al. Recombination in annealed and nonannealed polythiophene/fullerene solar cells: transient photovoltage studies versus numerical modeling. J. Phys. Chem. Lett. 1, 1432–1436 (2010).
Lin, B. Q. et al. Multiple-band linear-polarization conversion and circular polarization in reflection mode using a symmetric anisotropic metasurface. Phys. Rev. Appl. 9, 024038 (2018).
Blakesley, J. C. & Neher, D. Relationship between energetic disorder and open-circuit voltage in bulk heterojunction organic solar cells. Phys. Rev. B 84, 075210 (2011).
Li, F. et al. Plasmonic local heating induced strain modulation for enhanced efficiency and stability of perovskite solar cells. Adv. Energy Mater. 12, 2200186 (2022).
Zhao, Y. et al. A polymerization-assisted grain growth strategy for efficient and stable perovskite solar cells. Adv. Mater. 32, 1907769 (2020).
Wang, R. et al. Caffeine improves the performance and thermal stability of perovskite solar cells. Joule 3, 1464–1477 (2019).
Song, J. G. et al. Morphology characterization of bulk heterojunction solar cells. Small Methods 2, 1700229 (2018).
Noriega, R. et al. A general relationship between disorder, aggregation and charge transport in conjugated polymers. Nat. Mater. 12, 1038–1044 (2013).
Peng, Z., Ye, L. & Ade, H. Understanding, quantifying, and controlling the molecular ordering of semiconducting polymers: from novices to experts and amorphous to perfect crystals. Mater. Horiz. 9, 577–606 (2022).
Hao, B., Li, B. & Yu, W. Nonequilibrium structure diagram of pendular suspensions under large-amplitude oscillatory shear. Langmuir 37, 6208–6218 (2021).
Hao, B. & Yu, W. A new solid-like state for liquid/liquid/particle mixtures with bicontinuous morphology of concentrated emulsion and concentrated suspension. Langmuir 35, 9529–9537 (2019).
You, J. et al. A polymer tandem solar cell with 10.6% power conversion efficiency. Nat. Commun. 4, 1446 (2013).
Fu, H. et al. 16.3% efficiency binary all-polymer solar cells enabled by a novel polymer acceptor with an asymmetrical selenophene-fused backbone. Sci. China Chem. 65, 309–317 (2022).
Luke, J. et al. A commercial benchmark: light-soaking free, fully scalable, large-area organic solar cells for low-light applications. Adv. Energy Mater. 11, 2003405 (2021).
Chaudhary, D. K., Dhawan, P. K., Patel, S. P. & Bhasker, H. P. Large area semitransparent inverted organic solar cells with enhanced operational stability using TiO2 electron transport layer for building integrated photovoltaic devices. Mater. Lett. 283, 128725 (2021).
Zhao, J. et al. Highly efficient non-fused-ring electron acceptors enabled by the conformational lock and structural isomerization effects. ACS Appl. Mater. Interfaces 13, 25214–25223 (2021).
Zhang, X. et al. High-performance noncovalently fused-ring electron acceptors for organic solar cells enabled by noncovalent intramolecular interactions and end-group engineering. Angew. Chem. Int. Ed. 60, 12475–12481 (2021).
Zhang, X. et al. Enhancing photovoltaic performances of naphthalene-based unfused-ring electron acceptors upon regioisomerization. Sol. RRL 5, 2100094 (2021).
Fan, Q. et al. High-performance all-polymer solar cells enabled by a novel low bandgap non-fully conjugated polymer acceptor. Sci. China Chem. 64, 1380–1388 (2021).
Yi, Y. Q. Q. et al. Small molecule acceptors with a nonfused architecture for high-performance organic photovoltaics. Chem. Mater. 31, 904–911 (2019).
Wang, X. et al. Molecular-shape-controlled nonfused ring electron acceptors for high-performance organic solar cells with tunable phase morphology. ACS Appl. Mater. Interfaces 14, 28807–28815 (2022).
Ma, S. et al. Non-fullerene electron acceptors with benzotrithiophene with π-extension terminal groups for the development of high-efficiency organic solar cells. J. Mater. Chem. C 9, 13896–13903 (2021).
Han, C. et al. Enhancing efficiency and stability of organic solar cells through a simplified four-step synthesis of fully non-fused ring electron acceptor. J. Energy Chem. 93, 601–608 (2024).
Han, C. et al. Two completely non-fused ring acceptors working in an alloy-like model for efficient and stable organic solar cells. Adv. Energy Mater. 14, 2304063 (2024).
Xiao, Y. et al. A selenium-containing polymer donor enables 16.9% efficiency in non-fused electron acceptor-based organic photovoltaic cells. Adv. Energy Mater. 2400928 (2024).
Gu, X. et al. Simple-structured acceptor with highly interconnected electron-transport pathway enables high-efficiency organic solar cells. Adv. Mater. 36, 2401370 (2024).
Han, Z. et al. Precisely manipulating molecular packing via tuning alkyl side-chain topology enabling high-performance nonfused-ring electron acceptors. Angew. Chem. Int. Ed. 63, e202318143 (2024).
Han, D., Lim, C., Phan, T. N. L., Kim, Y. & Kim, B. J. Benzotriazole-based nonfused ring acceptors for efficient and thermally stable organic solar cells. Macromol. Rapid Commun. 43, 2200530 (2022).
Zhang, C., Ge, Z., Xue, J., Ma, W. & Sun, Y. Layer-by-layer processed efficient all‐polymer solar cells based on a nonfused polymerized small molecule acceptor. Macromol. Chem. Phys. 224, 2200395 (2023).
Chen, Y. et al. Asymmetric nonfused ring electron acceptor based on benzotriazole moiety for efficient organic solar cells. Sol. RRL 8, 2300891 (2024).
Zhang, X. et al. Side-chain engineering for enhancing the molecular rigidity and photovoltaic performance of noncovalently fused-ring electron acceptors. Angew. Chem. Int. Ed. 60, 17720–17725 (2021).
Wang, C. et al. Naphthobistriazole based non-fused electron acceptors for organic solar cells. J. Mater. Chem. C 10, 8070–8076 (2022).
Wang, J. et al. Easily available high-performance organic solar cells by regulating phenylalkyl side groups of non-fused ring electron acceptors. Adv. Funct. Mater. 33, 2301575 (2023).
Chen, Y. N. et al. A fully non-fused ring acceptor with planar backbone and near-IR absorption for high performance polymer solar cells. Angew. Chem. Int. Ed. 59, 22714–22720 (2020).
Yu, K. et al. High-performance nonfused electron acceptor with precisely controlled side chain fluorination. ACS Appl. Mater. Interfaces 15, 45158–45166 (2023).
